TECHNICAL DATA :
Nominal power (kW) 9.0
Heating power range (kW) 4.0 – 11.0
Thermal efficiency (%) 84,0
Exhaust outlet diameter (mm) 200
Intended for recuperation Tak
Type of fuel lignite briquette allowed, seasoned hardwood recommended
Weight (kg) 235,0
CO emission (at 13% O 2) ≤ given in % 0,10
Exhaust gas temperature (℃) 255,0
Max log length (cm) 30
Compliance with the norm BlmSchV 2 Yes
The minimum required active field of outlet grilles (cm2) ≥700
The minimum required active field of inlet grilles (cm2) ≥500
Type of glazing side
Opening the door up
Material of execution steel
Width (cm) 67,60
Height (cm) 147,00
Depth (cm) 61,90
Air inlet Yes
The lining of the combustion chamber Yes
Decorative glass type glass Yes
MAXIMUM USE OF ENERGY
Body and front made of high-quality steel, resistant to very high temperatures.
Efficient combustion and longer temperature maintenance thanks to the lining of the combustion chamber with Acumotte – a heat-accumulating material that increases the temperature in the chamber.
Stable and resistant to stresses, the fireplace door is made of a closed profile. The door seal is located in a profiled channel, which guarantees its proper adhesion and prevents it from falling out during operation.
A system of two deflectors that extend the exhaust path, combustion is more ecological.
Air supply only from the outside thanks to the built-in 125 mm air inlet with an air damper. Regulation of the air intake with one regulator, which excludes errors in improper use.
Triple combustion chamber venting system: primary air – directed to the plate on which combustion takes place; secondary air is supplied through openings in the rear wall. Additionally, the insert uses a clean glass system (air curtain).
SAFETY AT THE HIGHEST LEVEL
The front of the insert is equipped with a heat-resistant ceramics that can withstand temperatures up to 800 ° C.
Grateless insert – afterburning with ash, which means that the fuel burns into fine ash, which remains a minimum amount. The resulting thermal energy from wood is used to the maximum. The bottom plate of the insert is significantly lowered in relation to the door.
Reduction of soot deposition thanks to the clean glass system (air guide).
Decorative, heat-resistant glass that can withstand temperatures up to 800 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the insert.