Type of fuellignite briquette allowed, seasoned hardwood recommended
Weight (kg)275,0
CO emission (at 13% O 2) ≤ given in %0,10
Exhaust gas temperature(℃)260,0
Max log length (cm)30
Compliance with the norm BlmSchV 2Yes
The minimum required active field of outlet grilles (cm2) ≥700
The minimum required active field of inlet grilles (cm2) ≥500
Type of glazingside
Opening the doorup
Material of executionsteel
Width (cm)87,60
Height (cm)147,00
Depth (cm)61,90
Air inletYes
The lining of the combustion chamberYes
AshpanYes
Decorative glass type glassYes
ADVANTAGES
MAXIMUM USE OF ENERGY
The body and the front of the insert are resistant to high temperatures thanks to the material used – high-quality steel.
Efficient combustion and longer temperature maintenance thanks to the lining of the combustion chamber with Acumotte – a heat-accumulating material that increases the temperature in the chamber.
Air supply only from the outside thanks to the built-in 125 mm air inlet. Adjusting the air intake with one lever, which excludes errors in improper use.
Triple combustion chamber venting system: primary air – directed to the plate on which combustion takes place; secondary air is supplied through openings in the rear wall. Additionally, the insert uses a clean glass system (air curtain).
CONVENIENT USE
The insert is equipped with a grate, which makes cleaning the combustion chamber much easier.
The bottom plate of the insert is significantly lowered in relation to the door.
Double door opening system upwards (GUILLOTINE) and to the side. The raised and lowered doors facilitate loading the amount of wood, and the mechanism for opening the side will allow for more efficient cleaning of the glass.
Reduction of soot deposition thanks to the clean glass system (air guide).
MODERN DESIGN
The triple glazing of the insert guarantees the maximum vision of the fire.
Convenient and quiet guillotine mechanism for easy cleaning and maintenance of the insert.
Decorative, heat-resistant glass that can withstand temperatures up to 800 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the insert.
NBC 10 left / right BS guillotine
15 120,00 zł
three-sided air fireplace insert
Description
TECHNICAL DATA :
Nominal power (kW) 10.0
Heating power range (kW) 5 – 13.0
Thermal efficiency (%) 83,0
Exhaust outlet diameter (mm) 200
Intended for recuperation Tak
Type of fuel lignite briquette allowed, seasoned hardwood recommended
Weight (kg) 275,0
CO emission (at 13% O 2) ≤ given in % 0,10
Exhaust gas temperature(℃) 260,0
Max log length (cm) 30
Compliance with the norm BlmSchV 2 Yes
The minimum required active field of outlet grilles (cm2) ≥700
The minimum required active field of inlet grilles (cm2) ≥500
Type of glazing side
Opening the door up
Material of execution steel
Width (cm) 87,60
Height (cm) 147,00
Depth (cm) 61,90
Air inlet Yes
The lining of the combustion chamber Yes
Ashpan Yes
Decorative glass type glass Yes
ADVANTAGES
MAXIMUM USE OF ENERGY
The body and the front of the insert are resistant to high temperatures thanks to the material used – high-quality steel.
Efficient combustion and longer temperature maintenance thanks to the lining of the combustion chamber with Acumotte – a heat-accumulating material that increases the temperature in the chamber.
Air supply only from the outside thanks to the built-in 125 mm air inlet. Adjusting the air intake with one lever, which excludes errors in improper use.
Triple combustion chamber venting system: primary air – directed to the plate on which combustion takes place; secondary air is supplied through openings in the rear wall. Additionally, the insert uses a clean glass system (air curtain).
CONVENIENT USE
The insert is equipped with a grate, which makes cleaning the combustion chamber much easier.
The bottom plate of the insert is significantly lowered in relation to the door.
Double door opening system upwards (GUILLOTINE) and to the side. The raised and lowered doors facilitate loading the amount of wood, and the mechanism for opening the side will allow for more efficient cleaning of the glass.
Reduction of soot deposition thanks to the clean glass system (air guide).
MODERN DESIGN
The triple glazing of the insert guarantees the maximum vision of the fire.
Convenient and quiet guillotine mechanism for easy cleaning and maintenance of the insert.
Decorative, heat-resistant glass that can withstand temperatures up to 800 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the insert.
5-year warranty.
Additional information
wood
Kratki
air
three side glass
Related products
Fireplace with a water jacket LUCY PW 20 kW
9 940,00 zł Add to cartFireplace with a water jacket LUCY PW 16 kW
9 080,00 zł Add to cartFireplace insert LUCY 12 right BS
7 150,00 zł Add to cart