Technical parameters Smart name 1VTh Dimension Door: 450×510 mm Nominal power: 7.5 kW Heating range: 3 – 9 kW Energy efficiency: A + Average efficiency: 85% CO emission: 1.12 g / m3 Dust emission: 0.016 g / m3 Flue gas temperature: 220 degrees Celsius Exhaust outlet: 180 mm Air inlet: 150 mm Fuel type: hardwood Log length: 30 cm Nominal loading: 2.4 kg Fuel consumption: 2.4 kg / h Construction: steel-chamotte Weight: 180 kg
Meets the requirements of Ecodesign and EN 13 229, BImSchV Stuffe 2 for Germany, Article 15.a for Austria, LRV for Switzerland.
The advantages of HAJDUK fireplace inserts:
A modern double-shell steel-chamotte construction proven for years – a fireplace for many years The insert is permanently and firmly welded to the body, without the use of sealing materials and screws, welding robots are used, the welding is made of a noble gas – welds are of good quality and sealed – safety in daily use Constructional elements are cut using 2D and 3D laser cutters and then machined by bending machines and numerically controlled bending machines, including bending in the bending cell by the robot, mechanical elements made on a modern CNC machining center – precision made at Hajduk – Polish producer of the European class Premium Hajduk fireplace inserts are painted on a technological painting line: shot peening, robot painting and drying – the latest technologies for the highest quality of products Heat-resistant ceramic glass with temperature resistance up to 800 ° C, depending on the model of the contribution, it is possible to use double glass or pyrolitic glass The flue pipe passing through the exceptionally high firebox flange, for the recovery of an additional amount of hot air from flue gases – increased heat recovery and everyday savings The system of supplying and distributing air from the outside of the Jet Stream Superior with two combustion speed regulators, supplying primary air through the ash box and secondary air in the upper rear part of the furnace. Primary air facilitates the firing of the first and subsequent loads of wood, secondary air provides economical and ecological combustion – very precise control of the combustion process The Clear View self-cleaning system helps keep the glass clean The CLING upright door lifting mechanism – light and precise operation of the mechanism ensures high operating comfort Cartridges with CLING mechanism are equipped with an inspection hole accessible from the inside of the furnace that facilitates service operations without the need to destroy often very expensive fireplace housing – no additional costs in the event of failure Two deflectors system, the first vermiculite for increasing the temperature in the furnace, the second steel for extending the exhaust route, high instantaneous efficiency and the average reaching up to 90% depending on the model – saving fuel wood and environmental protection Hearth lined with chamotte shards 50 mm thick on the walls and 65 mm on the bottom (they are not lined with concrete) – stabilization of the room temperature – high thermal comfort High total weight of the fireplace insert – large accumulation of heat – durability for many years The bottom of the furnace is properly lowered relative to the door – it provides space for loading wood and ash – comfort for the user A spacious removable ash pan in the form of a bucket – convenience of use The door frame structure optimized for stiffness also has an excessive door opening limiter, a gasket placed in the door leaf – long-term trouble-free operation, correct adhesion and tightness of the door when working at very high temperatures Bracket in brushed steel in cartridges with doors opening upwards – elegance and modern style Ergonomic handle of the door with adjustable clamping force – possibility of independent adjustment of the clamping force – easier service activities Heatsinks on the sides and the back of the cartridge – stiffening the structure and increasing the heat exchange surface – durability and efficiency at an increased level Feet and bolts for setting the insert and leveling the unevenness of the ground, a can with a stub pipe for connecting the combustion air from outside the building – comfort of assembly Possibility to choose the most appropriate decorative accessories – individual selection for the interior Hajduk fireplace inserts are suitable for homes with recuperation – the efficiency of modern construction Certificates of compliance with the European Standard EN 13229, tightening of the BImSchV the second threshold required from 2015 for Germany, Article 15A for Austria, the threshold from 2015 and LRV for Switzerland, entitling to the sale of Hajduk products throughout Europe Thanks to many years of experience and used proven technological solutions, we provide a 5-year warranty on traditional inserts, 5 years on cartridges with a water jacket for closed c.o. and 2 years for inserts and cartridges to size and the door for open fireplaces.
Fireplace insert Hajduk Smart 1VTh
12 605,00 zł
Fireplace insert Hajduk Smart 1VTh
Available on backorder
Description
Technical parameters
Smart name 1VTh
Dimension Door: 450×510 mm
Nominal power: 7.5 kW
Heating range: 3 – 9 kW
Energy efficiency: A +
Average efficiency: 85%
CO emission: 1.12 g / m3
Dust emission: 0.016 g / m3
Flue gas temperature: 220 degrees Celsius
Exhaust outlet: 180 mm
Air inlet: 150 mm
Fuel type: hardwood
Log length: 30 cm
Nominal loading: 2.4 kg
Fuel consumption: 2.4 kg / h
Construction: steel-chamotte
Weight: 180 kg
Meets the requirements of Ecodesign and EN 13 229, BImSchV Stuffe 2 for Germany, Article 15.a for Austria, LRV for Switzerland.
The advantages of HAJDUK fireplace inserts:
A modern double-shell steel-chamotte construction proven for years – a fireplace for many years
The insert is permanently and firmly welded to the body, without the use of sealing materials and screws, welding robots are used, the welding is made of a noble gas – welds are of good quality and sealed – safety in daily use
Constructional elements are cut using 2D and 3D laser cutters and then machined by bending machines and numerically controlled bending machines, including bending in the bending cell by the robot, mechanical elements made on a modern CNC machining center – precision made at Hajduk – Polish producer of the European class Premium
Hajduk fireplace inserts are painted on a technological painting line: shot peening, robot painting and drying – the latest technologies for the highest quality of products
Heat-resistant ceramic glass with temperature resistance up to 800 ° C, depending on the model of the contribution, it is possible to use double glass or pyrolitic glass
The flue pipe passing through the exceptionally high firebox flange, for the recovery of an additional amount of hot air from flue gases – increased heat recovery and everyday savings
The system of supplying and distributing air from the outside of the Jet Stream Superior with two combustion speed regulators, supplying primary air through the ash box and secondary air in the upper rear part of the furnace. Primary air facilitates the firing of the first and subsequent loads of wood, secondary air provides economical and ecological combustion – very precise control of the combustion process
The Clear View self-cleaning system helps keep the glass clean
The CLING upright door lifting mechanism – light and precise operation of the mechanism ensures high operating comfort
Cartridges with CLING mechanism are equipped with an inspection hole accessible from the inside of the furnace that facilitates service operations without the need to destroy often very expensive fireplace housing – no additional costs in the event of failure
Two deflectors system, the first vermiculite for increasing the temperature in the furnace, the second steel for extending the exhaust route, high instantaneous efficiency and the average reaching up to 90% depending on the model – saving fuel wood and environmental protection
Hearth lined with chamotte shards 50 mm thick on the walls and 65 mm on the bottom (they are not lined with concrete) – stabilization of the room temperature – high thermal comfort
High total weight of the fireplace insert – large accumulation of heat – durability for many years
The bottom of the furnace is properly lowered relative to the door – it provides space for loading wood and ash – comfort for the user
A spacious removable ash pan in the form of a bucket – convenience of use
The door frame structure optimized for stiffness also has an excessive door opening limiter, a gasket placed in the door leaf – long-term trouble-free operation, correct adhesion and tightness of the door when working at very high temperatures
Bracket in brushed steel in cartridges with doors opening upwards – elegance and modern style
Ergonomic handle of the door with adjustable clamping force – possibility of independent adjustment of the clamping force – easier service activities
Heatsinks on the sides and the back of the cartridge – stiffening the structure and increasing the heat exchange surface – durability and efficiency at an increased level
Feet and bolts for setting the insert and leveling the unevenness of the ground, a can with a stub pipe for connecting the combustion air from outside the building – comfort of assembly
Possibility to choose the most appropriate decorative accessories – individual selection for the interior
Hajduk fireplace inserts are suitable for homes with recuperation – the efficiency of modern construction
Certificates of compliance with the European Standard EN 13229, tightening of the BImSchV the second threshold required from 2015 for Germany, Article 15A for Austria, the threshold from 2015 and LRV for Switzerland, entitling to the sale of Hajduk products throughout Europe
Thanks to many years of experience and used proven technological solutions, we provide a 5-year warranty on traditional inserts, 5 years on cartridges with a water jacket for closed c.o. and 2 years for inserts and cartridges to size and the door for open fireplaces.
Additional information
wood
Hajduk
air
straight glass
Related products
Fireplace insert LUCY 12 SLIM
6 050,00 zł Add to cartFireplace insert LUCY 12 right BS
7 150,00 zł Add to cartFireplace with a water jacket LUCY PW 16 kW
9 080,00 zł Add to cart