Freestanding stove HITZE CANE S

Description

The CANE S freestanding stove is a modern wood fireplace, characterized by high aesthetics and very good thermal emission parameters. Thanks to the use of a boiler plate, the fireplace has an extended service life.

A free-standing goat has been equipped with a sealed combustion chamber and an outside air intake connector. This makes it possible to use the fireplace in houses with recuperation, i.e. buildings equipped with mechanical ventilation. The combustion chamber has been lined with accumulative material that increases the temperature of the furnace, thanks to which the wood burns better during the operation of the furnace. The ACCUCERAM lining means that after extinguishing the furnace, the fireplace gives off heat to the environment for up to several hours. In addition, a deflector is placed above the combustion chamber, which, together with the smoke duct, extends the exhaust path, thus increasing the efficiency of the fireplace.

Air control in the furnace is carried out with the use of two independent throttles, one of which is responsible for the supply of primary air, and the other is for the regulation of the amount of secondary air. The free-standing fireplace is also equipped with an air curtain located directly above the door. The free-standing stove has a removable, retractable ash pan and a cast iron grate. Depending on the needs, the exhaust outlet can be installed on both the rear and the top wall of the heater.

The stove’s fireplace door is made of a specially shaped steel profile, characterized by high stiffness. The glazing of the fireplace is based on polished, transparent fireplace ceramics from one of the world’s leading manufacturers.

The most important features:

• The free-standing fireplace is made of high-quality P265GH boiler steel.
• The stove is equipped with a grate furnace and a removable ash pan for easy cleaning.
• The oval sides and the slender shape make the fireplace look attractive.
• Trouble-free ignition thanks to the use of an independent primary air throttle.
• The low range of heat load makes the goat ideal for use in smaller rooms.
• CANE S is a free-standing fireplace with a cast iron exhaust outlet, optionally located at the top or at the back of the fireplace.
• The CANE S goat glazing is made of double-sided polished chimney ceramics with a resistance of up to 800 ° C.
• The glass in the heater has an elegant DECOR frame.
• The freestanding stove was manufactured on the basis of a modern machine park.
• Komora spalania w kominku została wyłożona materiałem akumulacyjnym ACCUCERAM, poprawiającym parametry emisyjno cieplne pieca.The freestanding stove was manufactured on the basis of a modern machine park.
• The free-standing fireplace meets the requirements of BlmSchV II (Germany), 15a B-VG (Austria) and Ecodesign.

Energy class: A +

Ecodesign: yes

BlmSchV II: yes

Intended for recuperation: yes

Nominal power (kW): 6.5

Heating load range (kW): 3-8.5

Thermal efficiency (%): 83%

The emission of pollen at 13% O₂ (g/m³) : 0,038

CO emission at 13% O₂ (g/m³) : 1,080

Weight (kg): 118

Flue diameter (mm): 150

Inlet diameter (mm): 100

Dimensions width x height x depth (mm): 550 x 1019 x 400

Glass dimensions: 390 x 540