Fireplace with a water jacket LUCY PW 16 kW

Description

TECHNICAL DATA :

Nominal power (kW) 16.0

Average power from the water (kW) 10,0

Heating power range (kW) 7.0 – 19.0

Thermal efficiency (%) 84,0

Max working pressure (bar) 2,0

Exhaust outlet diameter (mm) 200

Intended for recuperation Tak

Type of fuel lignite briquette allowed, seasoned hardwood recommended

Libra (kg) 257,0

Water capacity (l) 39,0

CO emission (at 13% O 2) ≤ given in% 0,09

Flue gas temperature (℃) 200,0

Max log length (cm) 50

Pollen emission (pył) (mg/Nm³) 25,0

Compliance with the norm BlmSchV 2 Yes

Type of glazing Straight

opening dori left

Material of execution steel

Width (cm) 85,60

Height (cm) 138,40

Depth (cm) 40,70

Air inlet Yes

The lining of the combustion chamber Yes

Ashpan Yes

Decorative glass type glass Yes

Coil Yes

ADVANTAGES

MAXIMUM USE OF ENERGY

The body and the front of the insert are resistant to high temperatures thanks to the material used – high-quality steel.

A special assembly of the water jacket allows the collection of a large amount of heat from the flue gas and transfer to the heating system, thanks to which it is possible to obtain a high energy efficiency of the insert.

Built-in coil. The body of the water jacket is reinforced with pins. Inlet / outlet 1/2.

Efficient combustion and longer temperature maintenance thanks to the lining of the combustion chamber with Acumotte – a heat-accumulating material that increases the temperature in the chamber.

Afterburning of fuel particles thanks to a deflector that extends the exhaust path.

Air supply only from the outside thanks to the built-in 125 mm air inlet. Regulation of the air intake with one regulator, which excludes errors in improper use.

Double combustion chamber venting system (primary and secondary air).

Clean combustion thanks to the hexagonal hearth chamber

SAFETY AT THE HIGHEST LEVEL

Perfect tightness thanks to solid welds made in a noble gas shield.

Steel elements are laser cut with the use of modern devices and then bent on CNC bending machines.

The front of the insert is equipped with a heat-resistant glass that can withstand temperatures up to 800 ° C.

CONVENIENT USE

Grateless insert – afterburning with ash, which means that the fuel is burned into fine ash, which has a minimal amount. The resulting thermal energy from wood is used to the maximum.

Reduction of soot deposition thanks to the clean glass system (air guide).

Can be used in various mounting conditions thanks to adjustable feet.

Possibility to move the door from the standard right-hand opening to the left-hand opening.

MODERN DESIGN

Decorative, heat-resistant glass that can withstand temperatures up to 800 ° C, which gives the fireplace a modern and elegant look, optically enlarges the front of the insert.

The door of the insert has a modern sliding handle.

5-year warranty.