Nominal power (kW) 13.0
Average power from water (kW) 7.0
Heating power range (kW) 6.0 – 16.0
Thermal efficiency (%) 81.0
Max working pressure (bar) 2.0
Diameter of exhaust outlet (mm) 200
Meets ECODESIGN criteria Yes
Intended for recuperation Yes
Fuel Type recommended seasoned hardwood with moisture ≤20%
Weight (kg) 240.0
Water capacity (l) 34.0
CO emission (at 13% O 2) ≤ reported in%0.10
Flue gas temperature (℃) 230.0
Max log length (cm) 50
Pollen emission (dust) (mg / Nm3) 32.0
Compliance with the BImSchV 2 standard Yes
EEI energy efficiency ratio 106.71
The type of glazing side
Opening the door left
Material of workmanship steel
Width (cm) 78.00
Height (cm) 134,00
Depth (cm) 57.50
Air intake Yes
Lining the combustion chamber Yes
Decorative glass pane Yes
MAXIMUM ENERGY USE
Made of high quality steel body and high temperature resistant front.
Effective combustion and longer temperature retention thanks to the combustion liner Acumotte – a heat-accumulating material that increases the temperature in the chamber.
The special water jacket assembly allows you to pick up a lot of heat from the flue gas and transfer it to the heating system so that you can achieve high energy efficiency of the cartridge.
Built-in coil. The body of the water jacket is reinforced with pins. Input / output connector 1/2.
Sturdy and durable fire doors made of closed profile. The door seal is located in the profiled duct, which guarantees proper adhesion and prevents possible falls during operation.
The system of two deflections, which lengthen the way of exhaust, combustion is more ecological.
Delivering air exclusively from the outside thanks to the built-in 125 mm air intake with air damper. Adjustable air intake with one regulator, which eliminates errors in misuse.
The triple combustion chamber ventilation system: primary air – facing the combustion plate; Secondary air is provided with holes in the back wall. In addition, a clean glass system (air curtain) is used in the cartridge.
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in a noble gas shield.
Steel parts cut by laser with the use of modern equipment and then bent on CNC bending machines.
Front of the cartridge equipped with heat-resistant ceramics withstand temperatures up to 800 ° C.
Scrap-free – Burning on ashes, which means that fuel burns out to ash, which remains the minimum amount. In this way, the heat generated from the wood is maximized. Bottom plate of the cartridge significantly lowered against the door.
Limitation of soot deposition thanks to the system of clean glass (air wheel).
Glass decorative glass withstand temperatures up to 800 ° C, which gives the fireplace a modern and elegant appearance, optically enlarges the front of the cartridge.
The cartridge door has a modern handle.
Warranty 5 years.