Rated output (kW) 13.0
Average power of the water (kW) 7.0
Range of heating power (kW) 6.0 – 16.0
Efficiency (%) 81.0
The maximum operating pressure (bar) 2.0
Exhaust outlet diameter (mm) 200
Designed for heat recovery unit yes
Fuel type Acceptable brown coal briquette, recommended hardwood decay
Weight (kg) 348.0
Water capacity (l) 35.0
CO emission (at 13% O 2) ≤ given in% 0.10
Flue gas temperature (℃) 230.0
Max log length (cm) 50
Emission of dust (mg / Nm 3) 32.0
Compliance with BlmSchV 2 standard yes
Glazing type simple
Opening of the doors up
Width (cm) 83.10
Height (cm) 137.80
Depth (cm) 53.60
External air inlet yes
The liner of the combustion chamber yes
Decorative printed glass yes
MAXIMUM USE OF ENERGY
Made of high quality steel resistant to very high temperatures.
Efficient burning process [&] keeping temperature to keep warmth for longer thanks to lining of combustion chamber with Acumotte – heat accumulating material which raises the temperature in the combustion chamber.
Special water system which allows the big amount of heat from fumes is transferred to the heating system, thanks to that high energy efficiency is obtained.
Protection against overheating by the built-in coil pipe – 1/2 “input / output connector.
Fireplace’s doors resistant to tensions and stable thanks to the use of closed profile. Door seals designed in profiled canal which guarantees proper adherence and protects against falling out while operating.
More ecological combustion thanks to the double deflector system which extends the exhaust gas path.
Air supplied from outside only thanks to the bi-in air external 125mm fi inlet with throttle valve. Air adjustment with just one regulator which prevents from improper usage.
The triple system of combustion chamber air inlet: the secondary air is supplied through the holes in the back wall. Plus clean glass system designed (air curtain).
SAFETY AT THE HIGHEST LEVEL
Perfect tightness thanks to the solid welds made in a noble gas shielding.
All steel elements are laser cut and bent on CNC bending machines.
Insert’s front is equipped with a heat resistant ceramics that withstands temperatures up to 800 ° C.
CONVENIENT TO USE
Grateless fireplace insert – full combustion on the dust what means that firewood burns into fine ash at minimum amount. Obtained thermal energy from firewood is exploited to the maximum. The bottom plate of the insert is significantly reduced relative to the door.
Double door opening system – lift up (Guillotine) and side opening. Lifted door makes loading of wood easier and machanism of door opening allows to clean the glass. Parental control against unauthorized door opening.
Reduced soot deposition through a system of pure glass (air curtain).
Decorative, heat-resistant glass that can withstand temperatures up to 800 ° C. It gives a fireplace a modern and elegant look, visually enlarging the front of the insert.
5 year warrant