TECHNICAL DATA :
Nominal power (kW) 16.0
Average water power (kW) 10.0
Heating power range (kW) 7.0 – 19.0
Thermal efficiency (%) 84.0
Max working pressure (bar) 2.0
Diameter of exhaust outlet (mm) 200
Designed for recuperation Yes
Type of fuel allowed brown coal briquettes, recommended hardwood decay
Weight (kg) 257,0
Water capacity (l) 39,0
CO emission (at 13% O 2) ≤ given in% 0.09
Exhaust gas temperature (℃) 200.0
Max log length (cm) 50
Emission of pollen (dust) (mg / Nm3) 25.0
Compliance with BlmSchV 2 Yes
Type of glazing simple
Opening the door to the left
Width (cm) 85.60
Height (cm) 138,40
Depth (cm) 40.70
Air intake Yes
Lining of the combustion chamber Yes
Decorative glass type glass Yes
MAXIMUM ENERGY USE
Body and front of the cartridge resistant to high temperatures thanks to the material used – high quality steel.
The special water jacket assembly allows you to pick up a lot of heat from the flue gases and give you a large amount of heat to the heating system, making it possible to achieve a high energy efficiency of the cartridge.
Built-in coil. The body of the water jacket is reinforced with pins. Input / output connector 1/2.
Effective combustion and prolonged temperature retention thanks to the combustion liner Acumotte – a heat-absorbing material that increases the temperature in the chamber.
Burning of fuel particles with a deflector that extends the exhaust path.
Delivering air exclusively from the outside thanks to the built-in air intake fi 125 mm. Adjustable air intake with one regulator, which eliminates errors in misuse.
Dual combustion chamber Aa (primary and secondary air).
Clean combustion thanks to the hexagonal furnace chamber
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in a noble gas shield.
Steel parts cut by laser with the use of modern equipment and then bent on CNC bending machines.
The front of the cartridge is equipped with a heat resistant glass with a temperature of up to 800 ° C.
Scrap-free – Burning on ashes, which means that the fuel burns out to the fine ash, which remains the minimum amount. In this way, the heat generated from the wood is maximized.
Limitation of soot deposition thanks to the system of clean glass (air wheel).
Can be used in various mounting conditions thanks to adjustable feet.
The ability to move the door from the standard right-hand opening to the left.
Glass decorative glass withstand temperatures up to 800 ° C, which gives the fireplace a modern and elegant appearance, optically enlarges the front of the cartridge.
The insert door has a modern slide handle.
Warranty 5 years.