Nominal power (kW) 11.0
Heating power range (kW) 4.5 – 14.0
Thermal efficiency (%) 80.0
Diameter of exhaust outlet (mm) 180
Designed for recuperation Yes
Type of fuel acceptable brown coal briquettes, recommended seasoned hardwood
Weight (kg) 150.0
CO emission (at 13% O 2) ≤ given in% 0.10
Exhaust gas temperature (℃) 295.0
Max length of logs (cm) 40
Emission of pollen (dust) (mg / Nm3) 38.0
BlmSchV 2 compliant Yes
Minimum required outlet area (cm2) ≥900
Minimum required inlet grille (cm2) ≥700
Type of glazing simple
Opening the door to the left
Depth (cm) 44.00
Air intake Yes
Burner compartment Yes
Decorative glass type No
Active grid (cm2) ≥700
The insert is equipped with a single, decorative glass glass, which makes it look elegant and modern. Using this solution optically enlarges the front of the cartridge and highlights the vision of the fire.
The door has a comfortable handle.
MAXIMUM ENERGY USE
More efficient combustion and longer temperature maintenance thanks to the lining of the combustion chamber Acumotte, a heat-absorbing material that increases the temperature in the furnace.
Burning of fuel particles with two deflectors that extend the exhaust path. This process also increases the efficiency of combustion and guarantees a better use of energy and thus minimizes the emission of harmful substances into the atmosphere.
Air supply to the cartridge is made only from the outside, thanks to the built-in air inlet pipe fi 125 mm. Its adjustment is done by means of a throttle adjustable by one regulator located below the door, which eliminates errors in misuse. The whole mechanism works very quietly and without fail.
The cartridge uses a double combustion chamber ventilation system. Primary air, which facilitates the firing of wood, is provided by a system of holes in the fence.
In addition, the system uses a clear glass system (air curtain), that is, air is delivered directly to the glass through the channel system located on the sides of the fireplace. In this way oxygen is supplied to the upper part of the combustion chamber, which burns the gases produced by the combustion process, which further limits the emission of harmful CO to the atmosphere.
The use of such a venting system allows very precise control of the combustion process.
In addition, the maximum use of heat is due to densely distributed radiators.
SAFETY AT THE HIGHEST LEVEL
The front of the cartridge is equipped with heat resistant ceramics that can withstand temperatures up to 800 ° C. The glass offered by us is certified for quality and safety.
Body and front of the cartridge resistant to high temperatures thanks to the use of high quality steel.
Excellent tightness, thanks to solid welds made in a noble gas shield. Steel elements cut by laser using modern machines and then bent on CNC bending machines.
Scaleless cartridge, where the so-called. post-combustion on ash. In practice, this means that fuel burns out to ash, which remains the minimum quantity. The heat generated from this wood is maximized.
Limited soot deposition is achieved through the use of a clean glass system. The air curtain separates the glass from the hearth. It does not get dirty.
The ability to compensate for unevenness of the substrate and level of the cartridge thanks to adjustable feet.
Model equipped with a removable flue outlet, so that in the case of installation, no need to buy additional knees. It is easy to adjust the insertion angle to the chimney installation.