Nominal power (kW)
Heating power range (kW)
6.0 – 16.0
Thermal efficiency (%)
Diameter of exhaust outlet (mm)
Designed for recuperation
Acceptable brown coal briquette, recommended hardwood decay
CO emissions (at 13% O 2) ≤ in%
Exhaust gas temperature (℃)
Max length of logs (cm)
Emission of pollen (dust) (mg / Nm3)
Compliance with BlmSchV 2
Minimal Required Field of Exit Grates (cm2)
Minimum Required Field of Inlet Grates (cm2)
Type of glazing
Opening the door
Lining of the combustion chamber
Decorative glass panes
MAXIMUM ENERGY USE
Made of high quality steel body and high temperature resistant front.
Effective combustion and prolonged temperature retention thanks to the combustion liner Acumotte – a heat-absorbing material that increases the temperature in the chamber.
High profile and transversely located flames – increase the heat transfer area between the cartridge and the environment. Reducing the exhaust temperature contributes to increased efficiency.
Sturdy and durable fire doors made of closed profile. The door seal is located in the profiled duct, which guarantees proper adhesion and prevents possible falls during operation.
Burning of fuel particles with a deflector that extends the exhaust path.
Delivering air exclusively from the outside thanks to the built-in air inlet fitting fi 125 mm. Adjustable air intake with one regulator, which eliminates errors in misuse.
The triple combustion chamber ventilation system: primary air – facing the combustion plate; Secondary air is provided with holes in the back wall. In addition, a pure glass system (air curtain) is used in the cartridge.
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in a noble gas shield.
Steel parts cut by laser with the use of modern equipment and then bent on CNC bending machines.
Front of the cartridge equipped with heat-resistant ceramics withstand temperatures up to 800 ° C.
Scrap-free – Burning on ashes, which means that fuel burns out to ash with minimal amount of ash. In this way, the heat generated from the wood is maximized.
Bottom plate of the cartridge significantly lowered against the door.
Limitation of soot deposition thanks to the system of clean glass (air wheel).
Fireplace insert with two panes stacked at right angles (glazing without glass).
Glass decorative glass withstand temperatures up to 800 ° C, which gives the fireplace a modern and elegant appearance, optically enlarges the front of the cartridge.
Warranty 5 years.