Nominal power (kW) 17.0 Heating power range (kW) 8.0 – 21.0 Thermal efficiency (%) 80.0 Diameter of exhaust outlet (mm) 200 Designed for recuperation Yes Type of fuel allowed brown coal briquettes, recommended hardwood decay Weight (kg) 238.0 CO emissions (at 13% O 2) ≤ given in% 0.09 Exhaust gas temperature (℃) 250.0 Max log length (cm) 50 Emission of pollen (dust) (mg / Nm3) 35.0 BlmSchV 2 compliant Yes Minimum required outlet area (cm2) ≥1000 Minimum required field of entry grilles (cm2) ≥800 Type of side glazing Opening the door to the left Steel fabrication Width (cm) 90.50 Height (cm) 150.00 Depth (cm) 53,70 Air intake Yes Lining of the combustion chamber Yes Asphalt No Decorative glass type glass Yes
Advantages
MAXIMUM ENERGY USE
Made of high quality steel body and high temperature resistant front.
Effective combustion and longer temperature retention thanks to the combustion liner Acumotte – a heat-accumulating material that increases the temperature in the chamber.
High profile and transversely located flame tubes – increase the heat transfer surface between the cartridge and the environment. Reducing the exhaust temperature contributes to increased efficiency.
Sturdy and durable fire doors made of closed profile. The door seal is located in the profiled duct, which guarantees proper adhesion and prevents possible falls during operation.
Burning of fuel particles with a deflector that extends the exhaust path.
Delivering air exclusively from the outside thanks to the built-in air inlet fitting fi 125 mm. Adjustable air intake with one regulator, which eliminates errors in misuse.
The triple combustion chamber ventilation system: primary air – facing the combustion plate; Secondary air is provided with holes in the back wall. In addition, a clean glass system (air curtain) is used in the cartridge.
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in a noble gas shield.
Steel parts cut by laser with the use of modern equipment and then bent on CNC bending machines.
Front of the cartridge equipped with heat-resistant ceramics withstand temperatures up to 800 ° C.
CONVENIENT USE
Scrap-free – Burning on ashes, which means that fuel burns out to ash, which remains the minimum amount. In this way, the heat generated from the wood is maximized. Bottom plate of the cartridge significantly lowered against the door.
Limitation of soot deposition thanks to the system of clean glass (air wheel).
MODERN DESIGN
Fireplace insert with two panes stacked at right angles (glazing without glass).
Glass decorative glass withstand temperatures up to 800 ° C, which gives the fireplace a modern and elegant appearance, optically enlarges the front of the cartridge.
Fireplace insert MBA 17 lewy BS
2,057.00€
Fireplace insert MBA 17 lewy BS
Available on backorder
Description
Technical data
Nominal power (kW) 17.0
Heating power range (kW) 8.0 – 21.0
Thermal efficiency (%) 80.0
Diameter of exhaust outlet (mm) 200
Designed for recuperation Yes
Type of fuel allowed brown coal briquettes, recommended hardwood decay
Weight (kg) 238.0
CO emissions (at 13% O 2) ≤ given in% 0.09
Exhaust gas temperature (℃) 250.0
Max log length (cm) 50
Emission of pollen (dust) (mg / Nm3) 35.0
BlmSchV 2 compliant Yes
Minimum required outlet area (cm2) ≥1000
Minimum required field of entry grilles (cm2) ≥800
Type of side glazing
Opening the door to the left
Steel fabrication
Width (cm) 90.50
Height (cm) 150.00
Depth (cm) 53,70
Air intake Yes
Lining of the combustion chamber Yes
Asphalt No
Decorative glass type glass Yes
Advantages
MAXIMUM ENERGY USE
Made of high quality steel body and high temperature resistant front.
Effective combustion and longer temperature retention thanks to the combustion liner Acumotte – a heat-accumulating material that increases the temperature in the chamber.
High profile and transversely located flame tubes – increase the heat transfer surface between the cartridge and the environment. Reducing the exhaust temperature contributes to increased efficiency.
Sturdy and durable fire doors made of closed profile. The door seal is located in the profiled duct, which guarantees proper adhesion and prevents possible falls during operation.
Burning of fuel particles with a deflector that extends the exhaust path.
Delivering air exclusively from the outside thanks to the built-in air inlet fitting fi 125 mm. Adjustable air intake with one regulator, which eliminates errors in misuse.
The triple combustion chamber ventilation system: primary air – facing the combustion plate; Secondary air is provided with holes in the back wall. In addition, a clean glass system (air curtain) is used in the cartridge.
SAFETY AT THE HIGHEST LEVEL
Excellent tightness thanks to solid welds made in a noble gas shield.
Steel parts cut by laser with the use of modern equipment and then bent on CNC bending machines.
Front of the cartridge equipped with heat-resistant ceramics withstand temperatures up to 800 ° C.
CONVENIENT USE
Scrap-free – Burning on ashes, which means that fuel burns out to ash, which remains the minimum amount. In this way, the heat generated from the wood is maximized. Bottom plate of the cartridge significantly lowered against the door.
Limitation of soot deposition thanks to the system of clean glass (air wheel).
MODERN DESIGN
Fireplace insert with two panes stacked at right angles (glazing without glass).
Glass decorative glass withstand temperatures up to 800 ° C, which gives the fireplace a modern and elegant appearance, optically enlarges the front of the cartridge.
Warranty 5 years.
Additional information
wood
Kratki
air
corner glass
Related products
Fireplace insert MBM 10 guillotine
1,898.00€ Add to cartFireplace ZIBI 12
948.00€ Add to cartFireplace insert MBM 10 left BS guillotine
2,277.00€ Add to cart