Air fireplace insert ALBERO TRINITY
Effective tripartite contribution to modern projects with maximum vision of fire.
Minimizing the steel elements of the front and door of the insert while maintaining the durability and tightness of the furnace.
The used combined glass without prints maximize the natural look of the fireplace.
Opening the furnace with the use of a new guillotine mechanism ensuring tightness of the insert, safety against opening by children and with service access.
The design of the insert minimizes the effect of smoke getting back into the room when the door is opened.
A wide hearth with a cast-iron grate, independently ventilated and controlled by a throttle.
A large ash container in the form of a removable drawer under the grate.
Automatic maintenance of clean windows thanks to a three-sided air guide with independent air supply, ensuring the formation of an air curtain protecting the glass against contamination. Outside air is supplied through the Ø150 connector, and then divided into three independent channels Ø90: under the grate, lower air curtain and exhaust afterburner and the top air curtain.
Quality and ecology:
The shell of the insert is made of high-grade boiler steel (P265GH according to EN 10028-2) with the use of automated production and modern CNC devices (Laser 2D, 3D, press brakes).
The frame of the tripartite glazing is made of a special profile that guarantees stiffness and high temperature resistance.
The concrete deflector allows for longer combustion of fuel particles, extends the exhaust gas path and optimizes the combustion process by increasing the temperature inside the chamber.
Improvement of combustion parameters and efficiency thanks to the lining of the combustion chamber with refractory ceramic panels made of ceramic concrete that accumulate heat in the combustion chamber. The openings in the rear wall of the furnace are an independently ventilated exhaust gas afterburning system.
Meets BImSchV II, ECODESIGN standards.
The insert is equipped with a Ø200 cast iron flue with a 360-degree adjustment, giving the possibility of flue gas discharge in every direction.
Adjusting the height and leveling the fireplace is possible thanks to the legs (you can unscrew an additional 4 cm).
In accordance with the requirements of the Ecodesign Directive in the EU Member States: “This product cannot be used as the primary source of heating”
A energy class
Nominal power (kW) 12
Heating load range (kW) 6-15.5
Thermal efficiency (%) 78
The emission of pollen at 13% O2 (g / m³) 0.038
CO emission at 13% O2 (g / m³) 1.133
Possibility of warm building NO
Weight (kg) 384
Flue diameter (mm) 200
Inlet diameter (mm) 150
Active field of outlet grilles (cm²) 840-960
Active field of inlet grilles (cm²) 480-780
Glass dimensions 540 x 800 x 530